31 Zoekresultaten voor "users". - Onderdelen voor jouw Amerikaanse auto

2023-10-31 10:57:15 Melling Timing Chain Sets 3-501SA

2024-01-03 15:13:09 Edelbrock #7813 True Roller Timing Chain Sets Oldsmobile, V8

2023-01-12 14:50:09 Fel-Pro Head Gasket Sets HS7733PT1, 1955-57 Chevrolet 265 Cui

2023-04-10 10:52:44 Fel-Pro Head Gasket Sets HS8347PT Gaskets, Head Set, Detomaso, Ford, Lincoln, Mercury, 351C, 351M, 400, Set

2023-04-02 11:49:46 Wrenches, Wrench Sets, Standard Style, Open End/Box End, 12-point, Chrome Vanadium, Black, Set of 16

2020-12-28 09:22:03 Moroso 9872M Race wire sets, Ford 289,302,351W & 351C 8mm bougiekabels geschikt voor Hei ontstekingen met 135 graden bougiedoppen.

2021-12-15 14:53:37 Fel-Pro 1404 - Fel-Pro Performance Exhaust Header Gasket Sets, Steel Core Laminate, Square Port, Chevy, Small Block, Set

GM stuurpomp pulley alu met dubbele groef past op GM stuurpompen met spiebaan en moer op de as, geen pers pulley aansluiting

2023-04-08 12:09:24 Taylor Street Thunder Spark Plug Wire Sets 56058 Ford Small Block Over Valve Covers spark plug wires.; HEI Distributor; 135 deg.; Black

2023-04-08 12:02:23 PerTronix Flame-Thrower Spark Plug Wire Sets 808321 Spark Plug Wires, Flame-Thrower, RFI Suppression, 8mm, Blue, Stock Boots, Ford, Small Block, V8, Set

2023-04-08 12:33:51 Ford Performance Parts Spark Plug Wire Sets M-12259-C301 Spark Plug Wires, 9mm, Blue, Spiral-Wound, 135 Degree Boots, Ford, Lincoln, Mercury, Small Block, Set

2022-02-04 12:44:52 V8 Hei ontsteking pick up coil, voor Hei ontstekingen, kleurcode geel Yellow color code is used on Chevy and Cadillac V-8 and Oldsmobile ToronadoV-8. All of these engines have the starter motor on the right side

2023-06-15 20:10:10 Exhaust Gaskets, Header, Fiber, Stock Port, Chevy, Small Block, Kit

2023-02-20 11:28:01 Spark Plug Wires, Street Fire, 8.0mm, Black, Multi-Angle Boots, Universal, V8, Set

2022-12-11 14:52:36 The Edelbrock accelerator pump assembly part # 1470 is designed for use with Edelbrock Performer Series

2022-10-04 12:07:37 AEM Electronics Air Filter Elements 27-10016DK, filter is donker grijs/ zwart van kleur, The DRYFLOW filter cleans in minutes using environmentally friendly, mild, all-purpose cleaner. At the track or on the trail, you can quickly clean the filter by removing and knocking it against your hand to release a majority of the dirt. Since oil is not used, the dirt will not cake to the mediafs surface.Go Ahead, Whack It...Clean That Is!

2023-06-15 20:25:22 Engine Bolts, Stainless Steel, Black Oxide, Hex Head, Chevy, Small Block, Kit Fastener Color: Black oxide Fastener Material: Stainless steel Fastener Head Style: Hex head Intake Manifold Fasteners Included: Yes Valve Cover Fasteners Included: Yes Timing Cover Fasteners Included: Yes Oil Pan Fasteners Included: Yes Header Fasteners Included: Yes Water Pump Fasteners Included: Yes Fuel Pump Fasteners Included: Yes Water Neck Fasteners Included: Yes Distributor Clamp Bolt Fastener Included: Yes Special Attention: Anti-seize should be used on all stainless steel fasteners.

2023-01-02 11:43:22 Denso 3132, bougies 8 stuks, Spark Plug, Standard, KJ16CR-L11, 14mm Thread, 19.00mm Reach, Gasket Seat, Chevy, Chrysler, Dodge, for use on Honda

2023-09-18 15:23:20 Dual Plane Satin Aluminum Intake Manifold Chevy Big Block This is a new aluminum dual plane intake for big block Chevy engines. For use with '65-'00 396, 402, 427, and 454s with general duty oval port heads. Does not fit tall deck blocks. 180%u2A9A design for power off-idle to 6000 RPM. May be used with OEM or aftermarket carburetors, has dual pattern for spread bore Quadrajet or square bore Holley style carbs. Includes adapter plate when running square bores. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. Includes provision for exhaust heated choke. Not EGR equipped. Does not fit under stock Corvette hoods. This intake is perfect for everyday drivers to medium performance street applications. They are produced from steel molds to reduce core shift, have all the major features you would expect on the expensive ones such as 4 corner water outlet ports, nitrous/injector bosses, and the best part - the price! This is a stock replacement/street legal part for 396, 402, 427, and 454 V8s with OEM 4-bbl carb; 1965-%u201972 (1973 non-CA) passenger cars and 1966-%u201983 trucks, Suburbans, and heavy vehicles except stock equipped EGR. RPM Range Idle - 6000 Intake Port Dimensions 2.05" x 1.82" Manifold Height 5.75"

2023-04-02 12:08:59 Edelbrock 7524 - Dual-Quad Manifold, Chrysler 426-572 Hemi Edelbrock Part # 7524 Dual-Quad HEMI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500 range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style carburetor pad. Carburetor spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. They also retain the same carburetor linkage location from the factory. The Dual-Quad HEMI is compatible with factory style cylinder heads but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.

2023-09-19 12:20:13 Small Block Chevy Engine Stand Chevy engine cradle. Will fit small block Chevy engines. Perfect for storing short blocks or complete engines. Allows you to install pulleys and clutches with out being in the way. No need for 4x4's or worrying about engine tipping over in shop. Strong enough and durable enough to use in transporting your Chevy engine. When not in use the legs fold flat for easy storage. Finish - Painted Black Material - Steel Overall Length - 22" Overall Width - 16.375" Notes: Back legs are 11-1/2" Tall / Front legs are 14" tall. Good up to 750 lbs. Fits 1958 and Up SBC 283-400 engines.

2023-09-18 15:28:27 High Rise Dual Plane Satin Aluminum Intake Manifold Big Block Chevy This is a new aluminum dual plane Air Gap intake for big block Chevy engines. For use with '66-'00 396, 402, 427, and 454s with oval port heads. Does not fit tall deck blocks. 180

2023-09-18 14:51:19 Small Block Chevy Aluminum Cylinder Heads,hydraulic flat tapped camschaft valve spring setup. 205cc Intake Port, 64cc Chamber, 2.02/1.6 Valve, Angle Plug, .550 Lift Springs Works on 305, 327, 350 and 400 not drilled for steam holes (This is for a PAIR of cylinder heads) 7/16" Shouldered Screw In Studs and Guide Plates Included (Not Installed) These heads are complete and ready to bolt on. Hardened exhaust seats for unleaded fuel compatibility Bronze valve guides Manufactured with aircraft quality high grade aluminum alloy Multi-angle seat design for improved flow at low lifts Advanced port design for improved flow at all lifts Advanced combustion chamber design allows superb flame travel and burn Additional pushrod clearance machined along outside port walls Can use either early or late (Vortec) intakes Can use either perimeter bolt pattern or center bolt valve covers Threaded accessory holes in ends of heads Retains stock 23 degree angle and intake/exhaust bolt locations Thick deck to resist warping and allow for additional milling if desired Does not require offset rocker arms

Rocker Arm Nuts, Replacement Ball and Nut Kit for SUM-G6802/G6803, Set of 8 Rocker Arm Style:Non-roller Rocker Arm Nut Style:Self-locking Rocker Stud Thread Diameter:7/16-20 in. For Use with Stud Girdle:No Quantity:Sold as a set of 8. These Summit Racing%u2122 replacement rocker arm ball and nut kits are made for stamped steel rockers. When rebuilding an engine, it is recommended to replace the rocker studs along with the rocker ball and nuts.

2023-04-17 19:03:49 The ALKY additive is designed to increase lubrication of valve trains for methanol- and ethanol-powered cars. It reduces the corrosiveness of methanol and ethanol and in addition will reduce bore wash. ALKY causes methanol to burn with a yellow-tipped flame, instead of a colourless flame if untreated. MSA race series now mandate the use of such an additive for safety reasons if using methanol. Treatment Rate: One bottle of Alky (222ml) will treat a 205 L drum of methanol 1.1 ml of Alky per litre of methanol 4.1 ml of Alky per US gallon of methanol

2021-12-30 12:32:01 Edelbrock 8540 - Exhaust Header Bolts, 3/8"-16 x 3/4", Black Oxide, With Allen Socket Tool Edelbrock Exhaust Header Bolt Kit #8540 contains a set of 12 high-quality black oxide steel flanged bolts for universal applications that require a 3/8-16 thread pitch and 3/4-inch length. These header bolts feature a combination hex-Allen head that allows you to use a 7/16 combination wrench or the included Allen head socket. The flange design helps to distribute pressure and eliminates the need for separate washers. The black oxide finish provides a nice aesthetic look with mild resistance to corrosion in dry environments.

2020-12-22 14:42:14 Engine Gasket Sets, Full, Dodge, Plymouth, 5.2L, Kit DODGE A100 1968-1970 DODGE B100 1971-1980 DODGE B150 1981 DODGE B200 1971-1980 DODGE B250 1981 DODGE B300 1971-1980 DODGE B350 1981 DODGE CB300 1973-1979 DODGE D100 PICKUP 1967-1979 DODGE D150 PICKUP 1977-1981 DODGE D200 PICKUP 1967-1980 DODGE D250 PICKUP 1981 DODGE D300 PICKUP 1967-1980 DODGE M300 1968-1974 DODGE M350 1974 DODGE MB300 1970-1974 DODGE R300 1972-1974 DODGE RAMCHARGER 1974-1981 DODGE RD200 1978 DODGE RM300 1973-1974 DODGE RM350 1974 DODGE W100 PICKUP 1967-1977 DODGE W150 PICKUP 1977-1981 DODGE W200 PICKUP 1967-1980 DODGE W250 PICKUP 1981 DODGE W300 PICKUP 1967-1980 FARGO A100 VAN 1967-1970 FARGO A108 VAN 1967-1970 FARGO B100 VAN 1971-1972 FARGO B200 VAN 1971-1972 FARGO B300 VAN 1971-1972 FARGO D100 PANEL DELIVERY 1967 FARGO D100 PICKUP 1967-1972 FARGO D110 PICKUP 1967-1972 FARGO D200 PANEL DELIVERY 1967 FARGO D200 PICKUP 1967-1972 FARGO D210 PICKUP 1967-1972 FARGO W100 PANEL DELIVERY 1967 FARGO W100 PICKUP 1967-1972 FARGO W110 PICKUP 1969-1972 FARGO W200 PICKUP 1967-1972 PLYMOUTH PB100 1975-1980 PLYMOUTH PB100 VAN 1974 PLYMOUTH PB150 1981 PLYMOUTH PB200 1975-1980 PLYMOUTH PB200 VAN 1974 PLYMOUTH PB250 1981 PLYMOUTH PB300 1975-1980 PLYMOUTH PB300 VAN 1974 PLYMOUTH PB350 1981 PLYMOUTH TRAILDUSTER 1974-1981

2023-10-28 12:11:24 Chevrolet 305-350 1987-1998 roller cam Howards Cams 180245-10 Cam Style: Hydraulic roller, OE roller Camshaft Use: Street/Strip Camshaft Manufacturers Description: Fair idle, street/strip, auto OK with 2,500 stall. Basic Operating RPM Range: 1,600-5,400 Intake Duration at 050 inch Lift: 225 Exhaust Duration at 050 inch Lift: 231 Duration at 050 inch Lift: 225 int./231 exh. Advertised Intake Duration: 278 Advertised Exhaust Duration: 284 Advertised Duration: 278 int./284 exh. Intake Valve Lift with Factory Rocker Arm Ratio: 0.500 in. Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in. Valve Lift with Factory Rocker Arm Ratio: 0.500 int./0.510 exh. Lobe Separation (degrees): 110 Camshaft Gear Attachment: 3-bolt Remanufactured: No Computer-Controlled Compatible: No Valve Springs Required: Yes

2023-09-18 15:33:15 SBF Small Block Ford Single Plane High Rise Aluminum Intake Manifold 302 5.0 5L High Rise Single Plane Satin Aluminum Intake Manifold Small Block Ford, 260-302 This is a new aluminum single plane intake for small block Ford 260, 289, and 302 (up to 2001) engines. High rise design, big power for mid to upper RPM range! Ideal for high performance and race applications. For use with square bore style carbs. No provision for exhaust heated choke or exhaust crossover. Not EGR equipped. These intakes are produced from steel molds to reduce core shift, have all the major features you would expect on the expensive ones such as bridged rear water passages and nitrous/injector bosses RPM Range 3500 - 8000 Intake Port Dimensions 1.93" x 1.09" Manifold Height 5.39"

2020-07-28 12:38:38 GT1 MAX SAE 5W30 MOTOROLIE Full Synthetic, Description For best performance, follow the manufacturer's recommendations in your vehicle owner manual.. Exceeds ILSAC GF-5 requirements for new cars under warranty. Enhanced performance benefits at extreme temperatures compared with conventional engine oils. Exclusive Liquid Titanium protection additive provides extra wear protection and improved fuel economy. Formulated for use in vehicles operating on ethanol-containing fuels up to E85. Formulated to protect turbochargers and emission control system catalysts. %u203ASee more product details. Imported from USA. Kendall gt-1 max motor oil with liquid titanium protection additive is a premium-quality, full synthetic automotive engine oil designed to provide maximum engine protection for gasoline-fueled and flex-fueled passenger cars and light trucks under All operating conditions. It is particularly recommended for vehicles operating at extreme temperatures or under severe driving conditions, such as towing heavy loads. 1 US QT (946ml)

2022-12-21 15:07:01 Our A-Team Performance 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts Features: These unions are the best option to join 2 (3/16 inch) brake lines together. The nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24 A-Team Performance Parts are sold exclusively by Southwest Performance Parts. PACKAGE INCLUSIONS - 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings SIZE AND MATERIALS - both the unions and nuts is metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance FITMENT - Most common inverted flare/ double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines